Untuk berhenti berlangganan dari SPAMfighter mailing daftar sila klik sini.

Sia ingat,bahwa juka anda terus guna atau reregister SPAMfighter, anda akan menerima emails kita dengan secara otomatis .

Untuk menukar alamat e-mail anda,sila ikuti yang berikut :
* Dalam mail program anda, klik di “SPAMfighter” logo di SPAMfighter toolbar
* Halaman baru akan dibuka.
Ketika diminta, sangat PENTING untuk menguna e-mail dan kata sandi anda registered dengan kali pertama atau kita tidak dapat mengenali anda sebagai pengguna yang ada.
Jika lupa kata sandi anda , dapatkan dari sini.

10 hari percobaan SPAMfighter Pro telah berakhir dan anda telah diturunkan ke gratis SPAMfighter Standard.
Jika anda guna SPAMfighter di business atau anda ingin dapat lebih daripada 5 senarai alamat, anda harus beli SPAMfighter Pro.

10 hari percobaan SPAMfighter Pro telah berakhir dan anda telah diturunkan ke gratis SPAMfighter Standard.
Jika anda guna SPAMfighter di business atau anda ingin dapatkan footer, anda harus beli SPAMfighter Pro.

Sila ikuti install SPAMfighter yang berikut:
– Download SPAMfighter sinie
– Klik tombol “Download SPAMfighter”
– Save spamfighter.exe, etc. di desktop anda
– Setelah anda downloaded , klik SPAMfighter icon di desktop anda dan ikuti installation berikut.

If an email is determined to be spam, SEM moves the message to a folder named SPAMfighter in the users mailbox. If the folder does not exist, it will be recreated automatically. The move process is transactional and will rollback if it fails.

The administrator can change the anti-spam policy to delete spam mails, redirect them to a dedicated mailbox, or use a Quarantine that will keep the spam on the server for a set number of days.

Yes, SPAMfighter Exchange Module version 5 will filter incoming, outgoing and internal e-mails for spam. SEM have invividual filters that can be applied to outgoing mails.

The requirements are that you are using Exchange server 2007 and later versions of Exchange Server.

Read more about filtering of incoming mails by SEM here.

When emails are redirected to another email address directly from Exchange, they are sent to your other email address before they are stored in your Exchange, and thus SPAMfighter does not have the opportunity to filter them.

Please remove the forwarding from Exchange and use instead this method:1) Open the SEM Administration Module on the server and go to “Mailboxes” -> “Mailboxes”
2) Locate the mailbox in cause
3) Click the small configuration icon to the right of the mailbox
4) Choose “POP3” as primary mail protocol
5) Click “Save changes” follow by “Close”

In Outlook, click “Tools” -> “Rules and Alerts” -> “New rule” -> “Start from blank rule” -> “Check messages when they arrive”.Create a new blank rule with the following properties: * Sent to people or distribution list (select your email address)
 * Forward it to people… (add your second email address)
 * Except if the subject contains specific words (enter these characters: ** SPAM **)
 * Stop processing more rulesCreate another blank rule with the following properties: * Check messages when they arrive
 * With specific words in the subject (add the characters: ** SPAM **)
 * Move it to the specified folder (Choose SPAMfighter)
 * Stop processing more rulesIn step two above, please make sure that you select “With specific words in the SUBJECT”, not body. When you select “stop processing more rules”, the rule will run server-side and will be executed when an email is received, even if Outlook is not running. If the rule is marked as “client-side” in the Rules list, then please edit your rule and uncheck the option “on this machine only”. These rules need to run server-side to be effective.

If you receive many emails that appear to have been sent by yourself, then you can help prevent spoofed emails by removing your own domain(s) from the Domain whitelist.

In the Administration module, go to “Configuration” > “Policies”. Click the “Configure policy” button next to your policy. Then click the “Configure filter” button next to “SPAMfighter Sender Filter”. Remove your own domain name from the Domain whitelist, and your own email address from the Email Address whitelist.

If you have questions or need help on doing this, SPAMfighter Support Department are always ready to help – just write an email to semsupport@spamfighter.com

Go to “Configuration” -> “Usergroups” and click the “Edit” button next to your group.

Under “Default state”, uncheck the SPAMfighter and Virusfighter checkbox, so that the filters are not enabled by default for new mailboxes.

Yes – you can redirected spam to a dedicated mailbox. You can configure SEM to redirect spam to another mailbox through the Administration Module (under “Configuration” > “Policies”)

Please use your normal Windows credentials to login (domain/username and password).Alternatively, you can try to access the Administration page through the link marked “Solution Administrator”.

Please check in Active Directory that an account named “SPAMfighterService” is created, and that it a mailbox has been created in Exchange for the account.The user account needs to be member of the following usergroups:Administrators
Exchange Servers
Organization ManagementGo on your server to “Start” -> “All programs” -> “SPAMfighter Exchange Module” -> “Configuration” -> “Exchange Integration Manager”.Click the “Service status” tab. Click the button next to “Stop SPAMfighter Exchange Module service”.Click the “Service account” tab. Make sure that the name of the user account “SPAMfighterService” is written correctly. Enter the password correctly. Make sure that the proper domain is selected. Then click the “Confirm” button.Go back to the “Service status” tab and click the button next to “Start SPAMfighter Exchange Module service”.Then go to the “Integration” tab and click the button next to “Remove integration into Exchange”, then click the button next to “Add integration into Exchange”.If you still have difficulties, please use the support form to contact the support team.

The SPAMfighter Exchange Module uses the following ports:


Anti-spam community: UDP/TCP 2409: servers.backend.spamfighter.com


SEM Administration page (and SEM client toolbar for Outlook): TCP 5000


SEM communication between the Administration page and the server: TCP 5001


License and update: TCP 80 to:


http://login.spamfighter.com
http://update.spamfighter.com
http://download.dk.spamfighter.com
http://download.spamfighter.com

Read all about Microsoft .NET Framework here

SPAMfighter is a Microsoft Gold Certified Partner and SEM is certified by VeriTest® for “Windows 2003”, “SQL Server 2005”, “Web services” and “.net connected” certified.

Yes it can. SEM works with most common Antivirus software. Since SEM is integrated in the Exchange Server, it does not impact on the functionality of any Antivirus software.SEM also integrates fully with VIRUSfighter for Exchange – an addon product for SEM.

Yes, using the administration interface, you can easily disable spam filtering on a single mailbox.

SEM creates a unique irreversible signature for each email and its elements, and sends the signatures to the SPAMfighter Server for processing. The server then returns a score determining if the message is spam or not. The original mail message never leaves the server during SEM filtering.

SEM can support between 5 – 50.000 email accounts.

SEM gives you the highest level of confidentiality. Your email privacy and security are our top priority. Legitimate email on the server is never transmitted or shared with anyone – your legitimate email never leaves your server. Only a few encrypted blocks of data encoded with MD5 (a one way encryption algorithm also called a checksum) and the unique URLs are sent to the SPAMfighter Server.

SPAMfighter Exchange Server Module seamlessly integrates with Microsoft Exchange Server which makes the solution very fast.

As an email arrives and the Exchange Server routes it to its addressees, SEM makes a unique signature for each message and sends it to the SPAMfighter Server for evaluation. If the SPAMfighter Server determines that a message is spam, it notifies SEM and the spam mail is moved to the users’ spam folder.

SPAMfighter Exchange Server Module also offers reporting, so administrators can review statistics on how many messages SEM has filtered, how many users are enabled and more.

In addition, SEM is simple to use for end users as spam is automatically moved to the spam folder. While SEM simplifies administration and keeps software and configuration off the employee’s desktop, it also provides individual control for end users if the administrators decide they want this.

Since SEM utilizes the Exchange server interface, emails are not deleted but only moved. If SEM should unexpectedly fail during the analysis, processing or redirection of a mail item, the transaction will be rolled back and the system remain intact.

If the SEM installation fails, there will have been no interaction with the Exchange Server hence it has no impact on your configuration.

SEM sends installation details at registration, login information when running and email compiled hash values when testing e-mails. SEM never sends information sensitive to the network. Also all information sent and received is validated to avoid tampering.

Operating System
 Microsoft Windows Server 2000 or newer
 
Email Server
 Microsoft Exchange Server 2000 or newer

No, certainly not!
The worst case scenario is that the installation fails (not likely!) and SEM lets spam through to the users. In other words, the users receive the spam they are used to receiving. On top of that, SEM is very easy to uninstall completely, but our guess is that you wont want to after trying it out.
Bottom line, you can safely install the free trial and test it as much as you want without worrying about down time or other complications.

Yes we have, take a look here. (PDF document)

Take a look at our price list here.

Yes you can. You can test the full version of SEM for 30 days free of charge at no obligations. Download it here.

SEM supports Microsoft Exchange Server 2000, 2003, 2007, 2010 and 2013.

Since SEM utilizes the Exchange server interface, emails are not deleted but only moved. If SEM should unexpectedly fail during the analysis, processing or redirection of a mail item, the transaction will be rolled back and the system remain intact.

SPAMfighter is a Microsoft Gold Certified Partner and SEM is certified by VeriTest® for “Windows 2003”, “SQL Server 2005”, “Web services” and “.net connected” certified.

Yes it can. SEM works with most common Antivirus software. Since SEM is integrated in the Exchange Server, it does not impact on the functionality of any Antivirus software.SEM also integrates fully with VIRUSfighter for Exchange – an addon product for SEM.

Yes, using the administration interface, you can easily disable spam filtering on a single mailbox.

If an email is determined to be spam, SEM moves the message to a folder named SPAMfighter in the users mailbox. If the folder does not exist, it will be recreated automatically. The move process is transactional and will rollback if it fails.

The administrator can change the anti-spam policy to delete spam mails, redirect them to a dedicated mailbox, or use a Quarantine that will keep the spam on the server for a set number of days.

SEM creates a unique irreversible signature for each email and its elements, and sends the signatures to the SPAMfighter Server for processing. The server then returns a score determining if the message is spam or not. The original mail message never leaves the server during SEM filtering.

SEM can support between 5 – 50.000 email accounts.

SEM gives you the highest level of confidentiality. Your email privacy and security are our top priority. Legitimate email on the server is never transmitted or shared with anyone – your legitimate email never leaves your server. Only a few encrypted blocks of data encoded with MD5 (a one way encryption algorithm also called a checksum) and the unique URLs are sent to the SPAMfighter Server.

SPAMfighter Exchange Server Module seamlessly integrates with Microsoft Exchange Server which makes the solution very fast.

As an email arrives and the Exchange Server routes it to its addressees, SEM makes a unique signature for each message and sends it to the SPAMfighter Server for evaluation. If the SPAMfighter Server determines that a message is spam, it notifies SEM and the spam mail is moved to the users’ spam folder.

SPAMfighter Exchange Server Module also offers reporting, so administrators can review statistics on how many messages SEM has filtered, how many users are enabled and more.

In addition, SEM is simple to use for end users as spam is automatically moved to the spam folder. While SEM simplifies administration and keeps software and configuration off the employee’s desktop, it also provides individual control for end users if the administrators decide they want this.

If the SEM installation fails, there will have been no interaction with the Exchange Server hence it has no impact on your configuration.

SEM sends installation details at registration, login information when running and email compiled hash values when testing e-mails. SEM never sends information sensitive to the network. Also all information sent and received is validated to avoid tampering.

Operating System
 Microsoft Windows Server 2000 or newer
 
Email Server
 Microsoft Exchange Server 2000 or newer

No, certainly not!
The worst case scenario is that the installation fails (not likely!) and SEM lets spam through to the users. In other words, the users receive the spam they are used to receiving. On top of that, SEM is very easy to uninstall completely, but our guess is that you wont want to after trying it out.
Bottom line, you can safely install the free trial and test it as much as you want without worrying about down time or other complications.

Yes we have, take a look here. (PDF document)

Take a look at our price list here.

Yes you can. You can test the full version of SEM for 30 days free of charge at no obligations. Download it here.

SEM supports Microsoft Exchange Server 2000, 2003, 2007, 2010 and 2013.

Read all about Microsoft .NET Framework here

The SPAMfighter Exchange Module uses the following ports:


Anti-spam community: UDP/TCP 2409: servers.backend.spamfighter.com


SEM Administration page (and SEM client toolbar for Outlook): TCP 5000


SEM communication between the Administration page and the server: TCP 5001


License and update: TCP 80 to:


http://login.spamfighter.com
http://update.spamfighter.com
http://download.dk.spamfighter.com
http://download.spamfighter.com

Please check in Active Directory that an account named “SPAMfighterService” is created, and that it a mailbox has been created in Exchange for the account.The user account needs to be member of the following usergroups:Administrators
Exchange Servers
Organization ManagementGo on your server to “Start” -> “All programs” -> “SPAMfighter Exchange Module” -> “Configuration” -> “Exchange Integration Manager”.Click the “Service status” tab. Click the button next to “Stop SPAMfighter Exchange Module service”.Click the “Service account” tab. Make sure that the name of the user account “SPAMfighterService” is written correctly. Enter the password correctly. Make sure that the proper domain is selected. Then click the “Confirm” button.Go back to the “Service status” tab and click the button next to “Start SPAMfighter Exchange Module service”.Then go to the “Integration” tab and click the button next to “Remove integration into Exchange”, then click the button next to “Add integration into Exchange”.If you still have difficulties, please use the support form to contact the support team.

Please use your normal Windows credentials to login (domain/username and password).Alternatively, you can try to access the Administration page through the link marked “Solution Administrator”.

Yes – you can redirected spam to a dedicated mailbox. You can configure SEM to redirect spam to another mailbox through the Administration Module (under “Configuration” > “Policies”)

Go to “Configuration” -> “Usergroups” and click the “Edit” button next to your group.

Under “Default state”, uncheck the SPAMfighter and Virusfighter checkbox, so that the filters are not enabled by default for new mailboxes.

If you receive many emails that appear to have been sent by yourself, then you can help prevent spoofed emails by removing your own domain(s) from the Domain whitelist.

In the Administration module, go to “Configuration” > “Policies”. Click the “Configure policy” button next to your policy. Then click the “Configure filter” button next to “SPAMfighter Sender Filter”. Remove your own domain name from the Domain whitelist, and your own email address from the Email Address whitelist.

If you have questions or need help on doing this, SPAMfighter Support Department are always ready to help – just write an email to semsupport@spamfighter.com

When emails are redirected to another email address directly from Exchange, they are sent to your other email address before they are stored in your Exchange, and thus SPAMfighter does not have the opportunity to filter them.

Please remove the forwarding from Exchange and use instead this method:1) Open the SEM Administration Module on the server and go to “Mailboxes” -> “Mailboxes”
2) Locate the mailbox in cause
3) Click the small configuration icon to the right of the mailbox
4) Choose “POP3” as primary mail protocol
5) Click “Save changes” follow by “Close”

In Outlook, click “Tools” -> “Rules and Alerts” -> “New rule” -> “Start from blank rule” -> “Check messages when they arrive”.Create a new blank rule with the following properties: * Sent to people or distribution list (select your email address)
 * Forward it to people… (add your second email address)
 * Except if the subject contains specific words (enter these characters: ** SPAM **)
 * Stop processing more rulesCreate another blank rule with the following properties: * Check messages when they arrive
 * With specific words in the subject (add the characters: ** SPAM **)
 * Move it to the specified folder (Choose SPAMfighter)
 * Stop processing more rulesIn step two above, please make sure that you select “With specific words in the SUBJECT”, not body. When you select “stop processing more rules”, the rule will run server-side and will be executed when an email is received, even if Outlook is not running. If the rule is marked as “client-side” in the Rules list, then please edit your rule and uncheck the option “on this machine only”. These rules need to run server-side to be effective.

Yes, SPAMfighter Exchange Module version 5 will filter incoming, outgoing and internal e-mails for spam. SEM have invividual filters that can be applied to outgoing mails.

The requirements are that you are using Exchange server 2007 and later versions of Exchange Server.

Read more about filtering of incoming mails by SEM here.

You won”t be able to use the SPAMfighter Hosted Mail Gateway. We recommend that you use instead SPAMfighter PRO

With the SPAMfighter Hosted Mail Gateway, it does not matter what type of mail server you have. As long as you have your own domain name, we can filter your emails.

Then you will have to contact your IT provider. If your domain is hosted in several places, then contact the one responsible for your name servers (DNS).

Our smallest customers use it for 10 accounts and the largest we have worked with is more than 200.000 accounts.

When somebody sends an email to an email address on your domain, it will first reach SPAMfighter. We filter your spam according to the rules that you defined. Then, we redirect your email to your existing mail server. You will download your email normally. There are no changes needed in your Outlook.
Before we set up your SPAMfighter Hosted Mail Gateway account, please confirm that you will be able to modify the MX records for the domains listed, in order to redirect the email traffic through our filter. Once it has been processed by us, it will be forwarded to the original destination.

This is the only change that needs to be done to enable filtering from SPAMfighter. After you sign up for a trial, you will receive a unique address that you need to enter in the control panel where you manage the options for your domain name.
In the control panel for your domain name, you will see information related to the A-record and the MX-record. Do not change the A-record. Instead, change the MX-record. read about the MX Record here. Alternatively, you can ask for help from your IT solution provider.

You can calculate the price here

You can sign up for a 30 days free trial here

You won”t be able to use the SPAMfighter Hosted Mail Gateway. We recommend that you use instead SPAMfighter PRO

With the SPAMfighter Hosted Mail Gateway, it does not matter what type of mail server you have. As long as you have your own domain name, we can filter your emails.

Then you will have to contact your IT provider. If your domain is hosted in several places, then contact the one responsible for your name servers (DNS).

Our smallest customers use it for 10 accounts and the largest we have worked with is more than 200.000 accounts.

When somebody sends an email to an email address on your domain, it will first reach SPAMfighter. We filter your spam according to the rules that you defined. Then, we redirect your email to your existing mail server. You will download your email normally. There are no changes needed in your Outlook.
Before we set up your SPAMfighter Hosted Mail Gateway account, please confirm that you will be able to modify the MX records for the domains listed, in order to redirect the email traffic through our filter. Once it has been processed by us, it will be forwarded to the original destination.

This is the only change that needs to be done to enable filtering from SPAMfighter. After you sign up for a trial, you will receive a unique address that you need to enter in the control panel where you manage the options for your domain name.
In the control panel for your domain name, you will see information related to the A-record and the MX-record. Do not change the A-record. Instead, change the MX-record. read about the MX Record here. Alternatively, you can ask for help from your IT solution provider.

You can calculate the price here

You can sign up for a 30 days free trial here

SPAMfighter Mail Gateway needs to have access to the internet, but SPAMfighter Mail Gateway only needs access to UDP/2409 to servers.backend.spamfighter.com and TCP/2409 to http://login.spamfighter.com. To be able to receive automatic updates access to TCP/80 to http://www.spamfighter.com is needed, but not an absolute requirement. This makes it possible for the system administrator to secure the network by being able to close all other connections other than the ones listed.

SPAMfighter Mail Gateway works with Windows 2000 or newer and in Windows virtual environments (VMWare, Virtual Server, Hyper V etc.)

Yes, with the help of our administration module, it is easy to deactivate the spam filtering on a single mailbox.

Spam mails can automatically be quarantined, deleted, prefixed, marked or for example routed to a special e-mail folder or all of the above.

SPAMfighter Mail Gateway has numerous ways of determining whether or not an e-mail is spam or not. The most significant way is by creating a unique signature for each e-mail and its elements, and sends this signature to the SPAMfighter server for evaluation.  Afterwards, the server returns a score with the decision if the message is spam or not.  The original e-mail never leaves the server under SPAMfighter Mail Gateway filtering.

SPAMfighter Mail Gateway gives you the hightest degree of confidentiality. Your e-mail security and privacy is our top priority.  Legitimate e-mail on the server is never sent further or shared with anyone – your legitimate e-mails will never leave your server.  Only a few blocks of encrypted data and the unique web address are sent to the SPAMfighter server.

SPAMfighter Mail Gateway is a “store-and-forward” SMTP server – which means it will accept incoming e-mails instead, scan the e-mail, and route the e-mail on to another SMTP server. During the installation – or on any point in time afterwards – configuration of where to route e-mails can be configured. Due to this “store-and-forward” (i.e. gateway) concept – an existing SMTP server must exist.

SPAMfighter Mail Gateway sends installation details regarding registration, login-information and e-mail compiled hash-values, when e-mails are being tested. SPAMfighter Mail Gateway will never send sensitive information to the net.  All information that is sent and received is validated in order to avoid manipulation.

SPAMfighter Mail Gateway needs to have access to the internet, but SPAMfighter Mail Gateway only needs access to UDP/2409 to servers.backend.spamfighter.com and TCP/2409 to http://login.spamfighter.com. To be able to receive automatic updates access to TCP/80 to http://www.spamfighter.com is needed, but not an absolute requirement. This makes it possible for the system administrator to secure the network by being able to close all other connections other than the ones listed.

SPAMfighter Mail Gateway works with Windows 2000 or newer and in Windows virtual environments (VMWare, Virtual Server, Hyper V etc.)

Yes, with the help of our administration module, it is easy to deactivate the spam filtering on a single mailbox.

Spam mails can automatically be quarantined, deleted, prefixed, marked or for example routed to a special e-mail folder or all of the above.

SPAMfighter Mail Gateway has numerous ways of determining whether or not an e-mail is spam or not. The most significant way is by creating a unique signature for each e-mail and its elements, and sends this signature to the SPAMfighter server for evaluation.  Afterwards, the server returns a score with the decision if the message is spam or not.  The original e-mail never leaves the server under SPAMfighter Mail Gateway filtering.

SPAMfighter Mail Gateway gives you the hightest degree of confidentiality. Your e-mail security and privacy is our top priority.  Legitimate e-mail on the server is never sent further or shared with anyone – your legitimate e-mails will never leave your server.  Only a few blocks of encrypted data and the unique web address are sent to the SPAMfighter server.

SPAMfighter Mail Gateway is a “store-and-forward” SMTP server – which means it will accept incoming e-mails instead, scan the e-mail, and route the e-mail on to another SMTP server. During the installation – or on any point in time afterwards – configuration of where to route e-mails can be configured. Due to this “store-and-forward” (i.e. gateway) concept – an existing SMTP server must exist.

SPAMfighter Mail Gateway sends installation details regarding registration, login-information and e-mail compiled hash-values, when e-mails are being tested. SPAMfighter Mail Gateway will never send sensitive information to the net.  All information that is sent and received is validated in order to avoid manipulation.

Please do the following, if you want to install SPYWAREfighter:• Click on this link: Download
• Download SPYWAREfighter
• Open the installation file, which you just downloaded.
• Choose your prefered language
• Agree to our term of use, and click “Next”
• Choose where you want to save SPYWAREfighter. Leave this be if you have no preferences. Click “Next”.
• Fill in your E-mail address
• Click “Install”
• A little black icon resembling a detective will appear in your lower right corner, when SPYWAREfighter has finished installing. You can also access SPYWAREfighter by right-clicking this icon.

Please do the following, if you want to change your E-mail address in SPYWAREfighter:* Press Start > All Programs > Fighters > SPYWAREfighter > SPYWAREfighter
Your SPYWAREfighter program will now open
* Click on ‘Account’, in the vertical menu, on the left-hand side.
* click on “Account Settings”.
* Type in your new email address and click on ‘change’Your E-mail address has now been changed.

No, SPYWAREfighter will not protect you against viruses. SPYWAREfighter will protect you against unsolicited programs. Spyware, adware, etc.
You need an anti-virus program as well, if you want to obtain proper protection. We can recommend our own VIRUSfighter, since it makes the perfect addition in the fight against PC threats.
You can try VIRUSfighter 30 days for free. The newest version is available for download at our website.

To unsubscribe from emails sent from SPYWAREfighter click here
Please remember, you will resubmit to our emails, if you continue to use or re-register SPYWAREfighter.

Open your SPYWAREfighter menu from “Start -> All Programs -> Fighters -> SPYWAREfighter -> SPYWAREfighter” Click on “User ID” in the lower right corner of your SPYWAREfighter menu. You will get a Popup where you can see your UserID.

Please do the following, if you want to uninstall SPYWAREfighter:

• Go to Start > Control Panel > Add or Remove Programs
• Locate SPYWAREfighter on the list of programs
• Highlight SPYWAREfighter and click ‘Remove’ afterwardsSPYWAREfighter will now present you with the proper tools for uninstalling.• Choose Remove > Next > Remove

SPYWAREfighter is now uninstalled from your system.

Manual Activation

*Go to Start -> All Programs -> Fighters -> SPYWAREfighter -> SPYWAREfighter
This will open your SPYWAREfighter program
*Click on “Account” in the left menu
*Enter the product key shown on your invoice and click the Add Product Key button.After this please try to update your SPYWAREfighter to be sure you have the latest updates.

Please do the following, if you want to change your E-mail address in SPYWAREfighter:* Press Start > All Programs > Fighters > SPYWAREfighter > SPYWAREfighter
Your SPYWAREfighter program will now open
* Click on ‘Account’, in the vertical menu, on the left-hand side.
* click on “Account Settings”.
* Type in your new email address and click on ‘change’Your E-mail address has now been changed.

No, SPYWAREfighter will not protect you against viruses. SPYWAREfighter will protect you against unsolicited programs. Spyware, adware, etc.
You need an anti-virus program as well, if you want to obtain proper protection. We can recommend our own VIRUSfighter, since it makes the perfect addition in the fight against PC threats.
You can try VIRUSfighter 30 days for free. The newest version is available for download at our website.

To unsubscribe from emails sent from SPYWAREfighter click here
Please remember, you will resubmit to our emails, if you continue to use or re-register SPYWAREfighter.

Open your SPYWAREfighter menu from “Start -> All Programs -> Fighters -> SPYWAREfighter -> SPYWAREfighter” Click on “User ID” in the lower right corner of your SPYWAREfighter menu. You will get a Popup where you can see your UserID.

Please do the following, if you want to install SPYWAREfighter:• Click on this link: Download
• Download SPYWAREfighter
• Open the installation file, which you just downloaded.
• Choose your prefered language
• Agree to our term of use, and click “Next”
• Choose where you want to save SPYWAREfighter. Leave this be if you have no preferences. Click “Next”.
• Fill in your E-mail address
• Click “Install”
• A little black icon resembling a detective will appear in your lower right corner, when SPYWAREfighter has finished installing. You can also access SPYWAREfighter by right-clicking this icon.

Please do the following, if you want to uninstall SPYWAREfighter:

• Go to Start > Control Panel > Add or Remove Programs
• Locate SPYWAREfighter on the list of programs
• Highlight SPYWAREfighter and click ‘Remove’ afterwardsSPYWAREfighter will now present you with the proper tools for uninstalling.• Choose Remove > Next > Remove

SPYWAREfighter is now uninstalled from your system.

Manual Activation

*Go to Start -> All Programs -> Fighters -> SPYWAREfighter -> SPYWAREfighter
This will open your SPYWAREfighter program
*Click on “Account” in the left menu
*Enter the product key shown on your invoice and click the Add Product Key button.After this please try to update your SPYWAREfighter to be sure you have the latest updates.

Untuk mengaktifkan SLOW-PCfighter, sila ikuti yang berikut:
Buka klien SLOW-PCfighter Anda
Klik tombol jingga “Daftar sekarang” turun ke sudut kiri
Masukkan kode kunci produk Anda – Anda dapat menemukan pada tagihan yang kami kirimkan.
Klik “Aktifkan Sekarang”

Jawapan:

SPYWAREfighter hanya teliti virus jika install VIRUSfighter.jika pelanggan yang betul betul menyarankan untuk memiliki antivirus yang lain.tapi jika anda hanya SPYWAREfighter, anda boleh install antivirus software(dan sangat anjurkan untuk lakukannya.)

Untuk mengaktifkan SLOW-PCfighter, sila ikuti yang berikut:
Buka klien SLOW-PCfighter Anda
Klik tombol jingga “Daftar sekarang” turun ke sudut kiri
Masukkan kode kunci produk Anda – Anda dapat menemukan pada tagihan yang kami kirimkan.
Klik “Aktifkan Sekarang”

Jawapan:

SPYWAREfighter hanya teliti virus jika install VIRUSfighter.jika pelanggan yang betul betul menyarankan untuk memiliki antivirus yang lain.tapi jika anda hanya SPYWAREfighter, anda boleh install antivirus software(dan sangat anjurkan untuk lakukannya.)